230 V
50 Hz
In Republic of the Congo, they use power outlets and plugs of type C and type E. The voltage is 230 V, and the frequency is 50 Hz.
You will need an adapter for type C and E power outlets in Republic of the CongoIn Republic of the Congo, type C and E power outlets are used, while in New Zealand, you use plugs I. If you're traveling to Republic of the Congo, you'll need a power adapter for types C and E, as your power plugs won't fit the sockets there.
Your plug I does not match outlet type C.
Your plug I does not match outlet type E.
Since you'll need a travel adapter for Republic of the Congo when coming from New Zealand, we suggest opting for a universal power adapter that works in many countries and will also prepare you for future trips.
Make sure to get a power adapter for outlets of type C and E. If you often go abroad, consider getting an all-in-one adapter (most adapters even have additional charging ports for USB-A and USB-C).
Republic of the Congo runs on a 230 V electrical system, which is the same voltage standard used in New Zealand.
230 V50 Hz230 V50 Hz
There is no need for a voltage converter in Republic of the Congo, when traveling from New Zealand.To confirm, check if your devices require a voltage converter by looking at the 'INPUT' label, typically found on the power adapter or charger. If the label shows "INPUT: 100-240V, 50/60 Hz," the device is built to handle different voltage and frequency ranges, meaning you’ll only need a plug adapter for the outlets in Republic of the Congo. This is typical for devices such as notebooks, smartphones, digital cameras, and also for tablets, e-readers, and some battery chargers.
Yes, since both New Zealand and Republic of the Congo use 230 V and 50 Hz, you can use your New Zealander hair dryer in Republic of the Congo without needing a voltage converter.
Yes, you can use your laptop or smartphone in Republic of the Congo without any issues, as the voltage and frequency are the same in both countries (230 V, 50 Hz).
Yes, your New Zealander curling iron or flat iron will work in Republic of the Congo without needing a voltage converter, since both countries use 230 V, 50 Hz.
Yes, when traveling from New Zealand, you will need a power adapter for type C and E power outlets in Republic of the Congo.
No, you do not need a voltage converter since both New Zealand and Republic of the Congo use the same voltage (230 V) and frequency (50 Hz).
See if your power plugs from New Zealand fit into the sockets of other destinations and whether you need a voltage converter.
Europe60
Asia52
North America42
Oceania29
Africa58
